LEP Sunlight Source

I. Characteristics of the Morning Light Series LEP light source

1.1. Characteristics of LEP spectrum

The Morning Light series LEP light source is a continuous full-spectrum white light. The illuminated objects are displayed as clearly as under daytime sunlight. It has the characteristics of excellent color rendering, constant color temperature, extremely low light decay, no flicker, high brightness, strong fog penetration, energy saving and high efficiency.

The color temperature is 3500K-4500K, visible light accounts for 70%, invisible light accounts for 30%, red and blue light accounts for 68% of the visible light, and the spectrum wavelength ratio is very close to the spectrum of sunlight, see the table below:

Comparison between sunlight and several commonly used electric light sources

1.2. Physical characteristics of LEP light source

LEP light sources all use high-purity quartz bulbs with extremely high light transmittance. They are resistant to high temperatures and can be used for a long time at 1100°C without bursting. Their safety performance is higher than that of ceramic glass bulbs.

With excellent natural heat dissipation performance, the integrated LEP light source (including amplifier, power supply and lamp holder) can keep the temperature as low as 58℃ (room temperature @ 32℃) during long-term operation.

The radiant heat of LEP light source during operation is significantly lower than that of LED.

1.3. Application advantages of the Morning Light Series LEP

The power density of the pure white light series LEP light source reaches above AM1.5 (≥1000W/m²), and the irradiation intensity reaches above 1.0Sun. The spectral matching, irradiation stability and irradiation uniformity with sunlight can reach the AAA level of the international standard for solar simulators.

The following is a list of the central illuminance of simulated sunlight at different distances: 114100Lux@15cm, 28000Lux@120cm (equivalent to direct sunlight at noon in summer)

II. Technical parameters of the Morning Light series LEP light source

2.1. Parameters of the Morning Light series LEP light source

Product model	LEP-S-300-V23592-01
Product series	Morning Light Series LEP Light Source
Spectral range	295 nm-1800 nm
Initial luminous flux	23000 lm
Luminous flux efficiency	93 lm/w
Luminous energy	32857 （lm）
Luminous energy efficiency	132 （lm/w）
CCT	4000K
CRI	92
service life	50000h (≥80%)
AC power	270 W
DC voltage	28 V
Direct current	8.9 A
Dimming control	Customizable
Light output direction	Down ± 30
Intelligent switch	Supported
Opening time	30-60 seconds
Restart time	90-180 seconds (restart automatic protection)
Total weight	3.7kg (lamp head+microwave solid-state source+power supply+connector)
Outer packaging size	L*W*H: 510*240*110mm
Typical spectra (customizable)
Optical output distribution characteristics

2.2 Environmental requirements for LEP light sources

A) Work Environment

Temperature -25℃ to +45℃, humidity 5%-95%.

B) Storage environment temperature

Temperature -40℃ to +80℃, humidity 5%-95%.

2.3. Heat dissipation requirements of LEP light sources

A) Power supply cooling

If the LEP power supply is external, the power supply shell itself can meet the heat dissipation requirements. If the power supply is built-in, the heat dissipation must meet the requirement that the temperature rise is less than 35°C under a 25W heat source.

B) Power amplifier heat dissipation

The power amplifier (microwave solid-state source) must meet the requirement that the temperature rise is less than 35°C under an 80W heat source.

C) System cooling

When the ambient temperature is 30°C, the shell temperature of the entire LEP system must be kept below 70°C to meet safety regulations.

III. Components and dimensions of LEP light source

3.1 LEP lamp head size (IP54)

3.2. Size of microwave solid-state source (IP65)

3.3. Driver power size (IP67)

A) Appearance size

B) Power supply parameters

3.4 Line configuration and overall dimension diagram

4、 Model Naming Rules and Selection Guidelines

remarks: 

1. Color temperature is a range value:

35 (3500K-4500K), 50 (5000K-5500K), 65 (6000K-6500K);

2. Explicit refers to the lowest range value

72 represents the lowest Ra72, 80 represents the lowest Ra80, 92 represents the lowest Ra92, 95 represents the lowest Ra95;

3. Customers can choose or customize light sources with different spectra based on their actual application needs for the same model of LEP light source. We welcome further communication with you, such as:

1) There will be many different spectral options (1-99) for LEP light sources of the same model. We will recommend spectral types that are more suitable for user scenarios based on customer needs;

2) Requirements for the proportion of various light colors such as red, green, blue, etc;

3) Specific color temperature and color rendering index range values;

4. Due to the continuous updating and development of technology, if there is any change in the above technical data, please refer to the quotation.